How to paint kitchen cabinets

It’s been a few years since you’ve moved into your house. When you first moved in you had all of these ideas about renovating the place and a large collection of Pinterest images of your dream kitchen. Now, you’ve made up your mind and are ready to start renovating your kitchen. At this point, nobody can stop you.

But then, you start to think if you really want to go through all the trouble of a full revamp and feel like a refresh might do just the trick. Even better! We think that giving your kitchen a small refresh, like painting the kitchen cabinets, will actually have a big impact on the overall look. Now, all you have to do is put your sleeves up and get to work. Wonder how to do it? Keep on reading.

  1. Pick a colour, any colour.

When it comes to choosing the right colour for your own kitchen, there is no right or wrong answer. However, it is important to pick the right colour the first time around, as the last thing you want is to re-paint your cabinets right after painting them. The easiest way to see which colour suits your kitchen is to get a few colour samples, tape them to the current cabinets and see how you feel.

  1. Preparation is key.

Start by removing the doors, drawers and all hardware (hinges and door handles). Don’t think that you can skip this step and decide to paint over the hinges and door handles – trust us, it’s not a good idea.

Make a quick sketch of all the doors and drawers in your kitchen and number them. Then, label the doors and drawers with the corresponding number. The last you’ll want to be doing after all your hard work is to be guessing where everything goes.

Next, time to clean! Wipe everything down with a grease remover. This is a very important step because paint won’t stick to greasy cabinets.

  1. Sand it down.

Sand everything with a medium grip sandpaper. This will help the paint stick to the surface. Fold the sandpaper in half to get into the detailed areas on doors, drawers and door frames. After sanding, don’t forget to clean all the surfaces with a vacuum cleaner. 

  1. Don’t forget to prime.

Primer will also help the paint stick to the surface plus, it will cover any imperfections.

Top tip: if you have oak cabinets and are looking for a smooth finish, we would recommend filling the open pores before painting with several coats of primer or with spackling paste.

  1. Embody Bob Ross.

This is our favourite bit. Use a paint roller on larger surfaces to speed things up and then use a paintbrush lightly over the surface to ensure there are no roller marks. If you prefer to take your time, use a paintbrush all around. Whilst applying the paint, finish with top-to-bottom strokes along the wood grain.

  1. Assemble and admire.

Finally, let your masterpiece fully dry. Then, follow the sketch you did earlier with the positioning of your kitchen cabinets and put everything back in place.

If all of this seems too much, too time-consuming or you simply don’t want to get your hands dirty, don’t worry – the Squad will come to the rescue. Our team of highly experienced decorators in London will be able to give your kitchen cabinets a new lick of paint whilst you put your feet up and enjoy a warm cuppa. Request a free quote today by filling our online booking form or give us a call on 0800-0-12-12-12.

 

Disclaimer

At the Handy Squad we strongly advise that you always take safety precautions into consideration when undertaking a DIY project. We also strongly suggest that you closely read and follow the instructions, that are provided by the manufacturer, of any building materials, products or tools you use for your projects.

Our aim is to provide you with clear and correct instructions, so that you can easily complete any DIY project you desire. However, please note that the information we provide should only be used as a guideline and that some information within the text may not be entirely accurate.

When using our articles for information and advice, please note that it is your own responsibility to determine whether you are capable of undertaking and executing the task you wish to complete.

Before starting a DIY task, it is essential that you inform yourself of any existing building, gas, water and electrical works regulations. If you were to have any further concerns, we recommend that you complete additional research and/or contact the necessary professional body.

We also strongly recommend that a qualified tradesperson completes the relevant safety tests and checks on any DIY work you have completed.